![](https://www.aetrius.dev/wp-content/uploads/2023/07/PXL_20230721_132930247.jpg)
Created a DJI Smart Controller Wall Mount using Fusion 360. Printed it in Hatchbox PLA Red/PLA Black.
Ran into issues printing it in the direction I chose. This resulted in me pulling the case from the back plate and super gluing the back to the case. Overall it looks pretty sweet and I’ll mount it soon!
![](https://aetrius.dev/wp-content/uploads/2023/07/image-1-1024x576.png)
![](https://aetrius.dev/wp-content/uploads/2023/07/image-2-1024x576.png)
![](https://aetrius.dev/wp-content/uploads/2023/07/image-3-1024x576.png)
Leave a Reply